Heat Shield for Creality Space Pi X4 Filament Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heat shield for Space Pi X4—protects spools from direct heat. Print in nylon or ASA only.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
🔥 Heat Shield for Creality Space Pi X4 Filament Dryer
If you're using the Creality Space Pi X4 to dry high-temp materials like nylon, you’ve probably noticed the heating element sits directly above your filament. That can lead to:
-Spool warping
-Filament deformation
-Uneven drying
I designed this heat shield to solve exactly that. It blocks direct radiant heat from the heating element while still allowing hot air to circulate effectively around your filament spools.
🛠 Print Recommendations
To perform safely and withstand dryer temps up to 85–100°C, this part must be printed in a high-temp material like:
✅ PA6-GF (What I used — Sunlu PA6-GF: printed flawlessly and feels rock solid)
✅ PA12 CF
✅ PAHT CF
✅ ASA (if you're pushing it, but nylon is preferred)
❗Do NOT use PLA, PETG, or other low-temp materials. They will deform under heat.
🖨 Print Settings (Optimized)
---Walls: 4
---Infill: 100%
---No supports needed
---Orientation: Flat side down (as pictured)
I’ve included:
---STL file
---Pre-sliced G-code (tuned for Bambu Lab using PA6-GF)
So if you want to replicate exactly what I used — you're set.
💡 Why This Works
This isn’t just a visual cover — it creates a heat break between the radiant source and your spools, keeping temps even and focused where they should be: around your filament, not on it.
Let me know what you think, and feel free to remix it for your setup!
Enjoy safe and even drying! 🌡🔥