1 / 5
Heat Shield for Creality Space Pi X4 Filament Dryer — image 1
1 / 5

Heat Shield for Creality Space Pi X4 Filament Dryer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Heat shield for Space Pi X4—protects spools from direct heat. Print in nylon or ASA only.

Rating
0 / 5
Likes
40
Downloads
129
Makes
0
Views
1,398
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

🔥 Heat Shield for Creality Space Pi X4 Filament Dryer

If you're using the Creality Space Pi X4 to dry high-temp materials like nylon, you’ve probably noticed the heating element sits directly above your filament. That can lead to:

-Spool warping

-Filament deformation

-Uneven drying

I designed this heat shield to solve exactly that. It blocks direct radiant heat from the heating element while still allowing hot air to circulate effectively around your filament spools.

🛠 Print Recommendations

To perform safely and withstand dryer temps up to 85–100°C, this part must be printed in a high-temp material like:

✅ PA6-GF (What I used — Sunlu PA6-GF: printed flawlessly and feels rock solid)

✅ PA12 CF

✅ PAHT CF

✅ ASA (if you're pushing it, but nylon is preferred)

❗Do NOT use PLA, PETG, or other low-temp materials. They will deform under heat.

🖨 Print Settings (Optimized)

---Walls: 4

---Infill: 100%

---No supports needed

---Orientation: Flat side down (as pictured)

I’ve included:

---STL file

---Pre-sliced G-code (tuned for Bambu Lab using PA6-GF)

So if you want to replicate exactly what I used — you're set.

💡 Why This Works

This isn’t just a visual cover — it creates a heat break between the radiant source and your spools, keeping temps even and focused where they should be: around your filament, not on it.

Let me know what you think, and feel free to remix it for your setup!
Enjoy safe and even drying! 🌡🔥

Tags