9-Spoke Wheel With Tire - B-Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheels for the jjrobots B-Robot EVO 2.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed these wheels for the jjrobots B-Robot EVO 2 because I wanted something more rugged and based on a set of WORK XD-9 I used to have IRL. They should work on any NEMA17 motors with D-shaped shaft.
Attach wheel lock to wheels then attach wheel lock to NEMA17 motor shaft. Wheel lock fit might be a little tight, should be able to lightly hammer it in.
Tire model included which stretches over the wheels, to be printed in your choice of FLEX material. Adjust infill to your desire flex level.
Should be pretty easy to remix the lock nut to fit whatever motor shaft you want, it's a small piece that takes little time to print.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
Your choice.
Infill:
5-10%
Filament: Any Any Any
Notes:
For best tire result, print with flexible filaments. Tire will not fit over wheels if printed in other rigid filaments.
Category: Vehicles