1 / 5
Planchette Coaster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An oversized Planchette that can fit most glasses. Protects surfaces while looking interesting on its own.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 122
- Wydruki
- 2
- Wyświetlenia
- 354
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (73)Powiązane
About this model:
- This oversized Planchette coaster was inspired by Halloween, astral-themes, and takes the classic “Ouija” spirit board tool to become a decoration for the home around Halloween, or whenever!
- Size: can accommodate a wide variety of glasses and cups up to around 75mm, or 3 inches in diameter.
Printing:
- 2 color printing is achieved by pausing the print, swapping to another filament, and resuming the print once the 5mm thick base has been printed.
- I've included a .GCODE file for PLA:
- For .4mm nozzle; single extruder.
- This has an “M600” pause in the “Tool change G-code”. This allows the print to resume after filament has been swapped.
- You could also achieve a similar effect by painting the top and sanding the coaster lightly. I haven't experimented with this though.
- I had some issues with stringing when I printed in PETG; I'd recommend printing in PLA if quality of details is important.
Happy printing!