1 / 5
Planchette Coaster
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An oversized Planchette that can fit most glasses. Protects surfaces while looking interesting on its own.
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 122
- Makes
- 2
- Views
- 354
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
About this model:
- This oversized Planchette coaster was inspired by Halloween, astral-themes, and takes the classic “Ouija” spirit board tool to become a decoration for the home around Halloween, or whenever!
- Size: can accommodate a wide variety of glasses and cups up to around 75mm, or 3 inches in diameter.
Printing:
- 2 color printing is achieved by pausing the print, swapping to another filament, and resuming the print once the 5mm thick base has been printed.
- I've included a .GCODE file for PLA:
- For .4mm nozzle; single extruder.
- This has an “M600” pause in the “Tool change G-code”. This allows the print to resume after filament has been swapped.
- You could also achieve a similar effect by painting the top and sanding the coaster lightly. I haven't experimented with this though.
- I had some issues with stringing when I printed in PETG; I'd recommend printing in PLA if quality of details is important.
Happy printing!