1 / 3
M3 T-Nut for aluminum 3/4" T-Track 0.75" — zdjęcie 1
1 / 3

M3 T-Nut for aluminum 3/4" T-Track 0.75"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M3 T-Nut for standard aluminum 3/4" T-Track with 3/8" slot. Length 1/2".

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
1
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

T-nuts for standard aluminum 3/4" T-Track with 3/8" slot. Refer to dimensions photo. Examples include Amazon ASINs: B098LG6DVV, B0BJK7YL55, B0C4XYW5RG 

Length 1/2". Must be inserted in one of the track ends. 

Uses one M3 x 4-5.7 mm long threaded heat insert / embedment nut. Install the heat insert with the t-nut on a flat surface, so that it is flush (or below) top and bottom. 

Print recommendations: print in normal orientation, with base down. No supports required. 

Additional T-Nut models found in Collection at https://www.printables.com/@HighDesertHacker/collections/2735828.

If it works for you, please Like and post a Make with photo for others to see.

Tagi