M4 T-Nut for aluminum 3/4" T-Track 0.75"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M4 T-Nut for standard aluminum 3/4" T-Track with 3/8" slot. Length 1/2".
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
T-nut for standard aluminum 3/4" T-Track with 3/8" slot. Refer to dimensions photo.
Examples include Amazon ASINs: B098LG6DVV, B0BJK7YL55, B0C4XYW5RG
Length 1/2". Must be inserted in one of the track ends.
Uses one M3 x 4-5.7 mm long threaded heat insert / embedment nut. Install the heat insert with the t-nut on a flat surface, so that it is flush (or below) top and bottom.
Print recommendations: print in normal orientation, with base down. No supports required.
Additional T-Nut models found in Collection at https://www.printables.com/@HighDesertHacker/collections/2735828.
If it works for you, please Like and post a Make with photo for others to see.