1 / 2
Zinc blaster printed plunger rods and plungers for 25mm or 26mm ID PT — zdjęcie 1
1 / 2

Zinc blaster printed plunger rods and plungers for 25mm or 26mm ID PT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printed plunger rods and plungers for all your Zincs

Ocena
0 / 5
Polubienia
7
Pobrania
41
Wydruki
0
Wyświetlenia
222
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Plunger rods of various lengths to maximize the draw. Plungers are to take OD21mmX2.4mm rings but can do other 2mm thick rings as well.

All threads are M12. Plungers can be printed at 0.2 mm but for rods it is better to use 0.1-0.15 mm layer height unless you have a die to retouch them after printing. Rods in PC and PETg survive a few games when printed vertically with layer adhesion being the main reason for failure.

Tagi