Liczymy pasujące modele…
Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these designs of which I offer hardware kits for: Zc Aus Znc Aus Znc Aus Cosmetic Part Variants Zinc .50 Zinc .50 Cosmetic Part…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Powerful printable foam dart blaster capable of up to 250FPS. See the demo video below! Technically all…
Post a make if you print! I would love to see it. For easier printing, assembly, and better durability. No changes to hardware required. Especially handy for more brittle materials such as matte PLA, but in general handy for a more hassle…
Post a make if you print! I would love to see it. All improved/modified parts for the Zinc 2.0 from me: https://www.printables.com/model/720257-zinc-20-all-improved-parts If buying the hardware kit from Frontline Foam, select the legacy…
Post a make if you print! I would love to see it. Picatinny sight mount dimensioned specifically for the Zinc 2.0 foam dart blaster by 118 Design, as all existing mount models were too small. Still easy to prime the blaster. Requires 1 or…
Use the high power plunger for normal length K25 springs. The low power plunger should be used for the 788 spring, or 20 coils of K25 for a big power boost.
Please take a moment to leave a like if you download! The lip that clicks into the slot in the mag is slightly larger, and other revised geometry allows this lip to click in further. This makes the mag more secure once inserted and…
This is an OrangePI-5 case meant to take advantage of the Redux Robotics ZINC-V regulator . Assembly instructions here. It is designed to use a 40 or 50mm, 10mm thickness fan and fan filter. Assembly requires the following hardware: 2x…
Please take a second to leave a like if you download! Thicker base part for the proprietary mags for the Zinc 2.0 by 118 Design, due to the default one being very thin and breaking easily when dropped. The protrusion that inserts into the…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Powerful printable foam dart sniper pistol blaster capable of up to 250FPS These are alternative cosmetic…
Use drum spring instead of the mag spring. Drum spring with constant force is much cheaper and easier to source, also space and weight saving. Spring spec: 0.1 x 5 x 600mm Constant Force Drum Spring Only done 7 round and 13 round mags.…
It fits 80mm zinc gutter (popular in France), but you can easily adjust the size as you'll find the Fusion360 file included. The outlet pipe fits inside a 32mm PVC tube (inner hole 27mm). Print with PETG or better (PLA works but after few…
Post a make if you print! I would love to see it. Mag base part with trimmed edges for the proprietary mags for the Zinc 2.0 by 118 Design. Part is also thicker due to the original one being very thin and breaking easily when dropped. The…
Holsters a Zinc 1, 1.2 or 2. Attach to 1x2, 2x2, 2x3, molle or picatinny plate with screws / rods ~4mm diameter or friction fit printed pin key. Trigger lock works best with a 3mm screw and appropriately sized torsion spring, but small…
-Englisch- The rain collector consists of 3 parts. Rain collector Sieve Pipe connectors First, push the pipe connector upwards on the rain pipe. Place the prepared rain collector with inserted sieve and 1-inch hose on the PVC pipe and…
Uses: 9 3mm x 7mm x 3mm F683ZZ bearings ( https://www.amazon.com/dp/B07Z3DRZX9 ) 9 3mm x 14mm steel dowel pins ( https://www.amazon.com/dp/B07Y58JKMC ) This piece replaces your Zinc 2.0's front piece and integrates a 10 degree BCAR into…
This alternate catch and plunger rod system allows you to not need the metal plunger core that is standard with the zinc. I did this so I could more easily source my own zinc hardware as that plunger core is some non standard piece of…
This model is designed for easier print of the Zinc 2.0 slide. Some cosmetic changes were made, as well as larger tolerances for the plunger tube, plunger rod, and magnets. The hole to see through to the plunger tube was also removed.…
Źródło oznaczyło ten model jako treść 18+.
Rain harvesting system update: Added filter door for easy access and designed filter to print without supports.
Made this for my own but decided to share it in case it can helps someone Bearing like this one on amazon:…
This is a Nerf blaster display stand for the Zinc Pistol (a blaster made by 118 Design). There are two versions. One has the bottom “shoe” of the stand facing forward, and the other has it facing backwards. Choose the version that will…
I call this the Zinc 2.1, and it includes all 3 variants, the Znc, Zinc, and Ziinc. The Zinc family is a line of compact MIG springer blasters that hit extremely hard for their size, up to potentially 300fps for the largest model (Ziinc).…
A visual rework to most of the external bits of a Zinc 2.0 Muzzle SCAR is remixed from the linked file. Frame is remixed from the original files at https://github.com/118design/ZINC Trigger Guard is my own design Category: Sport & Outdoors
Added trigger lock so you can sprint/roll/backflip without the blaster slipping out. Trigger lock requires an m3 screw through a torsion spring. Mounts to molle pad with printed pins.
The idea of this device is to spin the dart using escaping air that rotates through channels out of the blaster to force the dart to rotate. In practice, it at least works decently.
3d printed case for the Pubmote project , a VESC onewheel tilt remote. Thanks to Markoblaster for designing the original. This version fixes a handful of flaws in the original design and introduces some quality-of-life improvements.…
Updated plunger head with a replaceable TPU face. This is probably only necessary for pre-compressed spring loads The low power plunger can accept up to 20 coils of K25 spring The long plunger can accept an entire K25 spring and is…
Lightversion of the original. Print ist the longway in direction of your bedmooving to prevent layershifting in the thin walls. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Filament:…
It's pretty simple. Dots for your iron sights made of filament. Jam filament into the hole with some super glue and you have some nice circles to line up for your sights.
Base Extenders for the Zinc V2 10 round magazines! They cover the base of the 10 round magazine and reaches all the way up to the handle so it has a more complete look. printed in petg, PLA+ or TPU, they are extremely durable. Enjoy!…
Pin is a piece of filament Needs a bungee or spring for the paddle Modified from the vikinger design for the 1.0 magazines.
Lets you see the mechanical goodies
Plunger rods of various lengths to maximize the draw. Plungers are to take OD21mmX2.4mm rings but can do other 2mm thick rings as well. All threads are M12. Plungers can be printed at 0.2 mm but for rods it is better to use 0.1-0.15 mm…
This 3D model is designed for seamless integration with a 100mm zinc gutter system, ensuring efficient water drainage. Key Features: Standardized Outlet Compatibility – The outcome is adapted for 1" and 1 1/4" garden hoses diameters ,…
These are mag holder inserts for the BlitzShorta foam dart magazine carrier system. I created a version of the insert for both the Zinc 2.0 and the Nightingale magazines. Added text to all, and to Spyder's Angled Talon version, and to the…
My original design sucked, so I made a better one. This speedplate is designed to fit Zinc 2.0 magazines. All credits for the original deisgns go to 118 Designs. Go check him out at: https://118.design/ Category: Sport & Outdoors
Experiments with angled print orientation for the slide have not turned out well, recommend horizontal orientation with supports. Remix of 118's Zinc blaster - https://github.com/118design/ZINC
Run KptnAutismus's drum mag on your Zinc. Replaces the “Neck” in the original files. Print 1x zinc dummy (still iterating) and 5x original dummies for a comfortable feed.
I tweaked the original design: Faux shell ejection port, dotted ironsights, overall design, minimal slide play
This is a case for an Orange Pi 5 with room to fit the Zinc-V+ power regulator from Redux Robotics , as well as a cooling fan and filter. Remixed from Redux's original design in the vented case & internal regulator configuration. Assembly…
Looking for some other BCAR options for your Zinc 2.0? Looking for the Agent 47 aesthetic for your Nerf Hobby? Look no further. I dig the Rev 2 Ex BCAR system, and I also dig the Zinc despite all issues and hate it receives, so I thought…
Made it shorter, and added a grip specifically for zinc 2.0 mags. 52cm (20.5 inches in freedom units) of elastic was a comfortable grip level for me.
Included a decorated Arknights themed grip
The cube consists of basic zinc ZN data like: melting point temperature boiling point temperature density in grams per cm3 (on the back side of the cube)
This is an edit of the Zinc 2.0 Bottom Plate by 118 Designs, seen here: https://github.com/118design/ZINC/blob/main/ZINC_Files%20/Current/STL/BASE%5B2.0%5D.stl This is meant to replace this piece and be the bottom of the mag, I just added…
A modified slide for the Zinc 0.50 incorporating a short picatinny rail for optics.
This is a remix of the Zinc .50 Nerf pistol handle with a pre-configured fuzzy skin applied to the smooth grip. Files included: -STL – clean handle model compatible with any slicer - 3MF – Orca Slicer project with fuzzy skin applied to…
The further develop of this mod is suspended due to the release of Zinc 2.0. But it should work just fine. No further comment. Category: DIY
A molecular ball-and-stick model of the zinc tetraphenylporphyrin molecule (ZnTPP), created using the crystal structure of ZnTPP, Blender, and the molecular nodes plugin (by Brady Johnston). For printing this model in PLA with 0.4 mm…
FetteWorst's HONKSHOT but for the Zinc 2.0 Designed to fit the 4.5 inch 6 bcar muzzle for the Znc, will fit in larger bcar muzzles, but probably not shorter ones. Assemble with mostly superglue because I'm too lazy to widen the screw…
You'll need a length of 10-32 / 10-24 threaded rod and 2x hex nuts for the bolt arm, 8x 5-ish mm 3m screws for the zinc grip sideplates, 2x 20+mm 3m screws for the plunger terminator grip connection, and a bit of coat hanger wire or…
Zinc .50 Display Stand This is a simple display stand for all possible combinations of the Zinc .50 dart blaster . It keeps the blaster locked in place using the mag release while also not stressing the mag release spring. Its also able…
Zinc Grip but Ontos Should work with Ontosii that have original or close to original grip stubs
Hold a Zinc + mags on a ~1.4" / 35mm standard dress belt Holster uses a compression spring / torsion spring + 3m screw (~ 30mm) + 3m nut Mag holders use ~55cm of 2.5mm elastic each
Problem: We have a cat who is diabetic, this means we have to dose the poor chap with insulin everyday and sometimes the box the insulin bottle comes in is a bit squashed. Solution: This set of models creates a new coozy for the bottle, a…
Risers suitable for the $3 Pinnacle 50mm Zinc Plated Barrel Bolts found at Bunnings Australia. These risers allow you to adapt the bolt lock to your needs. I know this is a really simple model but the holes are weirdly spaced and this…
smooshed a buncha crap together in tinkercad to make it not eject my mag every shot you WILL need a shitload of sanding and deburring for this to fit at least from my experience, idk how to do fillets in tinkercad so i just cut the sharp…
A deck board has to sit level on a zinc flashing that slopes . A solid shim does that, and creates the problem this one is built to avoid: it dams the runoff, so water stands permanently between the wood and the metal. That puddle matters…
I call this the Zinc 2.1, and it includes all 3 variants, the Znc, Zinc, and Ziinc. The Zinc family is a line of compact MIG springer blasters that hit extremely hard for their size, up to potentially 300fps for the largest model (Ziinc).…
Totally featureless ZINC slide, a clean slate for making your own custom slides. Clean topoplogy without awful CAD artifcacts.
A modified slide for the Zinc 0.50 incorporating a short picatinny rail for optics.
Zinc .50 Display Stand This is a simple display stand for all possible combinations of the Zinc .50 dart blaster . It keeps the blaster locked in place using the mag release while also not stressing the mag release spring. Its also able…
Post a make if you print! I would love to see it. Mag base part with trimmed edges for the proprietary mags for the Zinc 2.0 by 118 Design. Part is also thicker due to the original one being very thin and breaking easily when dropped. The…
Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these designs of which I offer hardware kits for!: Zc Aus Znc Aus Znc Aus Cosmetic Part Variants Zinc .50 Zinc .50 Cosmetic Part…
Post a make if you print! I would love to see it. Picatinny sight mount dimensioned specifically for the Zinc 2.0 foam dart blaster by 118 Design, as all existing mount models were too small. Still easy to prime the blaster. Requires 1 or…
Post a make if you print! I would love to see it. All improved/modified parts for the Zinc 2.0 from me: https://www.printables.com/model/720257-zinc-20-all-improved-parts If buying the hardware kit from Frontline Foam, select the legacy…
Slide for Frontline Foam's Zinc compatible with Trijicon RMR style optics
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Powerful printable foam dart blaster capable of up to 250FPS. See the demo video below! Technically all…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Powerful printable foam dart blaster capable of up to 250FPS. See the demo video below! Technically all…
I've added the mount for screwing on a Slug SCAR to the muzzle of the Zinc 2.0. Now you can screw on your suppressor scar like James bond. idk if this even works, it was just a quick 5 minute project, so let me know if this works for you.…
Standard paddle release talon magwell + chopped magwell for superdrums with 53mm necks
This is a quick edit of the zinc 2.0 mag made by Adiya Hu. It's a 13 round mag with a flush bottom cap as opposed to the one that juts out for a normal length mag. It works with both drum springs and regular mag springs. I've only tried…
Go get a hardware kit here! https://118.design/ I've added alternative slide designs, catch housing as well as a beavertail. You'll need a slightly longer screw than the stock one provided, about m3x18 or so. Compensator works the same as…
![Zinc 2.0 dotted sight slide [minimized slide wobble]](https://media.printables.com/media/prints/1047086/images/7945689_8bcab319-80f4-4acc-9a2f-a28a3a91b632_4d0defd6-c0da-48f2-967d-3204dcf95f6c/screenshot-2024-10-23-042140.jpg)
