1 / 2
Zinc 2.0 Alternate Catch and Plunger Rod — zdjęcie 1
1 / 2

Zinc 2.0 Alternate Catch and Plunger Rod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Uses Sillybutts' SLAB catch and plunger rod system instead of the default catch and metal plunger core.

Ocena
3 / 5
Polubienia
30
Pobrania
120
Wydruki
1
Wyświetlenia
1094
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This alternate catch and plunger rod system allows you to not need the metal plunger core that is standard with the zinc. I did this so I could more easily source my own zinc hardware as that plunger core is some non standard piece of hardware or just custom CNC. 

I find this holds on to the catch quite well, just as well as the metal one in my opinion. I have put 100s of darts through it with no issue.

Make sure the “T” is facing up so it catches properly. 

If you ever notice it not catching it is likely because your plunger rod managed to twist slightly, simply twist your plunger rod until you see the “T” facing up again. In my testing I found this does not happen often as its not too easy to twist the plunger tube accidentally.

Optionally fill in the “T” with a color sharpie of your choosing to make it easier to see, and gives you a bit of an accent color.

Tagi