Festool Adapter for slide valve for dust extraction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for attaching a Festool extraction hose to a pull-type slider.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I used Valterra SB120 pull-type sliders for my homemade dust extraction system in my wood workshop to easily close the openings I didn't need. I used 50 mm HT pipes for the extraction system.
The SB120 pull-type sliders fit the pipe perfectly, but the Festool suction hose no longer fits.
This adapter solves the problem. It is printed in TPU for the necessary flexibility.
Diameter
Slide valve side: 62 mm
Festool side: 58 mm
How to print
I've used Buddy3D TPU A95 and unless for this TPU is no profile in PrusaSlicer, I've printed it very slow and it worked. Maybe you can speed up it a little bit. I've attached the BGCode file.
If you found this useful please leave a make and/or a like or support me on Ko-Fi -T hank You!