Runcam Wifilink2 FPV case for Cramer4x4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FPV case for the Runcam Wifilink2 FPV camera, for Dukedoks's Cramer 4x4 truggy
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This FPV case can be used on the Duke Doks's CRAMER Truggy RC 4x4
standard version and also on his body kit if you print “Cramer_Body_Spoiler wth FPV test” file.
https://www.printables.com/model/1274256-cramer-truggy-rc-4x4-full-3d-printed
https://www.printables.com/model/1361375-body-kit-cramer
Print "bottom caseV3" and “self made top caseV2” in PLA+ or PETG.
The “self made top TPU” file should be obviously be printed in TPU.
Supports are required.
Case top and bottom are joined by M3 screws, and the TPU part is glued on the top of the “self made top caseV2” file.
In the TPU part, you can press fit two Runcam antennas like these: https://shop.runcam.com/runcam-5-8-ghz-antenna/
The camera can be tilted so that it suits your needs. I opted to see the wheels of the RC car.