Universal Controller Hanger (remix from seanj)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the original universal controller hanger by seanj with an N64 variant.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just wanted to make a few adjustments to this model. I have a fair bit more controllers to hang so I shortened the height a fair bit. I also rounded off the edges as the printed models were quite sharp. I also made an N64 specific variant since it's a… special shape. The interlock blocks at the top and bottom had very tight tolerances even on a printer where I really trust the tolerances of. I gave .5 mm clearance on the interlocks so they are easy to assemble. Also because I am terrible at modifying stl files I just reengineered it in fusion so I apologize if the dimensions aren't quite accurate.