Rugged 1S Battery Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6-slot 1S battery box for Tiny Whoop. Four sizes for multiple 1S battery types.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix turns the original narrow, rugged box into a compact battery case. I removed the handle and foot pads, since they weren’t needed for a box this small. A custom insert was added inside, designed to hold 6 1S 300mAh batteries. I chose 6 slots deliberately, since most Tiny Whoop chargers have 6 ports. Storing batteries in sets of 6 makes charging and flight prep more organized and efficient.
The box comes in four length and width variants: two short versions for GNB-type batteries, one longer version for slightly larger packs like BetaFPV Lava or Tattu 300mAh batteries, and the wide and long box version for big packs like BetaFPV 550mAh batteries (⚠ should be tested).
Only the seal requires TPU — the box and insert can be printed with any standard material.
You’ll need 3 M3x12mm screws for assembly for narrow boxes, or 3 M3x16 for the wide ones.