Quick Connect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Symmetric universal connector for tubes, PTFE, Bowden or bracelets. (PLA might not work for long term use)
- Ocena
- 4,981 / 5
- Polubienia
- 2417
- Pobrania
- 3655
- Wydruki
- 52
- Wyświetlenia
- 52 411
- Oceny
- 52
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Design
This quick connector features a supporting thread to ease the press in process of the PTFE tube.
The tube will be hold in place by the 2 holding rings on top.
Assembly
Put some painters tape around the tube (leave >2cm free) to get a better grip.
start screwing 10mm in.
wait for 5min so the PTFE will deform and adapt the thread.
screw into final position by pressing and screwing until a tiny end protrudes.
press the protruding rim outwards by putting in some filament and bending out wiggling around to ensure smooth passage.
remove the tape and let it rest a day.
If you need a more secure connection you can add a drop superglue (CA) from the bottom - it will soak the thread and increase the form fit but keep in mind PTFE can't be glued.
