1 / 4
Backscatter Miniflash 2 (MF-2) and Snoot (OS-1) holder — zdjęcie 1
1 / 4

Backscatter Miniflash 2 (MF-2) and Snoot (OS-1) holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for optical snoot and aperture cards with Backscatter's Miniflash2

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
181
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

Two versions of a simple holder to keep your backscatter snoot and aperture cards safe and out of the way when not in use. Clips on to the Backscatter Miniflash-2 with 21700 size battery case.

The holder is a tight fit over the top of the battery case and will need to be stretched open a bit to fit over the flared end, but this also means is will not come off easily while diving. I recommend securing further with a cable tie, which will also limit any rotation of the holder. 

I suggest printing with extra wall loops (I printed with 4) and a slightly higher sparse infill density (20%). My test prints were all in PETG given underwater use.

Two versions here, depending on which orientation you want for the aperture cards. The parallel version might protect the cards a bit more from getting caught or bent as they lie a bit closer to the flash unit.

The snoot and aperture cards should still be clipped off when not in use.

Tagi