Backscatter Miniflash 2 (MF-2) and Snoot (OS-1) holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for optical snoot and aperture cards with Backscatter's Miniflash2
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Two versions of a simple holder to keep your backscatter snoot and aperture cards safe and out of the way when not in use. Clips on to the Backscatter Miniflash-2 with 21700 size battery case.
The holder is a tight fit over the top of the battery case and will need to be stretched open a bit to fit over the flared end, but this also means is will not come off easily while diving. I recommend securing further with a cable tie, which will also limit any rotation of the holder.
I suggest printing with extra wall loops (I printed with 4) and a slightly higher sparse infill density (20%). My test prints were all in PETG given underwater use.
Two versions here, depending on which orientation you want for the aperture cards. The parallel version might protect the cards a bit more from getting caught or bent as they lie a bit closer to the flash unit.
The snoot and aperture cards should still be clipped off when not in use.