LG Monitor Remote Holder Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop remote caddy/holder for LG Ultragear OLED monitor remotes or other similar remotes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Was getting annoyed at not having anywhere to put the remote for my LG Monitor, so modeled a basic little caddy for it.
Three style versions: plain, side cuts & side + front cuts. I only printed front+sides version.
The slot is ~43.5mm wide (X), 10mm depth (Y) and 55mm height (Z). I printed with a modifier to make the bottom 4.5mm 100% infill (or 22 bottom layers at .2mm layer height) to add weight and make sure it's stable, it only added like 15 minutes print time and 10 grams of extra filament.
Free to remix and use non-commercially, with attribution.
(topology of the model isn't great, been getting back into learning proper CAD)