OTT Slingshot with Interchangeable Grips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build it your way – modular OTT slingshot with interchangeable grips
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 241
- Wydruki
- 0
- Wyświetlenia
- 957
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
OTT (Over The Top) slingshot featuring interchangeable grips that let you customize the feel and ergonomics to your preference.
Designed specifically for 3D printing – easy to print, no supports required, and comfortable to hold.
Ideal for recreational target shooting.
The interchangeable grip system allows you to experiment with different handle shapes and styles for better control and comfort. The model is designed for M3 screws and heat-set inserts.
If you’re preparing your own bands, check out my other projects — you’ll find a rubber cutting tool that makes trimming and shaping your slingshot bands quick and precise.
⚙ Print Settings:
- Material: PETG / ABS / ASA recommended
- Handle: lower infill (around 20–40%) for lighter weight
- Arms: higher infill (50–80%) for strength and durability
- Wall loops: increase to 4 or more perimeters for extra rigidity and impact resistance
- No supports required
- Layer height: 0.2 mm
- Designed for standard OTT flat bands
- M3 screws and heat-set inserts
⚠ Disclaimer: This is a hobby project – not a toy. Always use responsibly and ensure proper safety precautions.