OpenRC F1 Silicone Molding For Low Profile Tire Rims
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silicone mold for Palmiga OpenRC F1 rims. Compatible with my differential setup.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
V5 Update: 06.Nov.2025 . Updated the bottom mold to include inward-leaning pillars along the rim, which help align it properly within the mold. Centering the rim ensures proper balance.
OpenRC F1 Silicone Molding For Low Profile Tire Rims
Palmiga designed some amazing rims for silicone molding the OpenRC F1 tires. I’ve made a mold for the front tire rims, which are 34 mm in height. Since I’m using a differential setup with 34 mm tires on both the front and rear, there’s no separate mold for rear-type rims.
I’ve also included the .f3d source file in case you’d like to tweak the design — for example, to turn the slicks into rain tires or try your own tread pattern.
👉 Original Palmiga design: Thingiverse – Palmiga OpenRC F1 Rims
👉 My differential model: OpenRC F1 Differential with Belt Pulley
The outer diameter of the tire is 56mm.
🧩 Parts List
To Purchase
- 8× M3 15 mm Allen head bolts→ Longer ones won’t fit.
- 8× M3 nuts → Goes inside the mold casing.
- 1× M4 50mm allen head bolt + 1 m4 nut
- Shore A 30/40 two compound silicone → White (you can mix color agent) or gray/black if you can find.
To Print
💡 Tip: Set the seam to “random” to achieve a balanced tire, as a vertical seam line can negatively affect balance.
- mold_bottom.stl ×1 → Use support on build plate only to have good holes for nuts.
- mold_casing.stl ×1 → Insert 8 nuts during printing.
⏸ Pause the print at 11 mm (≈ layer 55 at 0.2 mm layer height) and again at 22 mm (≈ layer 110 at 0.2 mm layer height) - mold_top.stl ×1 →
- rim_fixer.stl ×1 → Put the m4 nut on top of this fixer, insert in into the bearing slot of the tire and fix it with the m4 bolt to the bottom mold
Tips
- 60 grams of silicone is enough for one tire. (I mix in 2 grams of starch with 60 grams of Shore A30 silicone to make it slightly firmer, as the base material is a bit too soft for my preference.)
- Before assembling the mold, apply silicone mold release spray.
- If you’re using a two-part silicone that requires only a small amount of curing agent (the one I use uses 2%), use a plastic syringe — it makes measuring and checking the amount in millilitres much easier.
- 1 gram of liquid coloring tint was enough to tint the 60 grams of silicone.
- Measure the gap between the rim and the casing mold with a caliper to be sure that the rim is centered.