Hifiman HE400SE Grilles used with Original Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Hickman HE400SE Grills by VOID to be used with the original retention rings
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The height of the base has been reduced by 0.2mm, enough for 2 layers on the bottom. This allows it to be used easily with the original retention ring. However, it could be a user error on my end.
On the original model, the nubs could be a little too big and I found it difficult to attach or detach from the headphones.
There are 2 different versions here. 1 has all nubs removed, making it easy to drop in and use with the retention ring but has the draw back of possibly free spinning. The other has the 2 bottom nubs while leaving both the top nubs intact to prevent the free spinning but still maintaining the easy drop in.
Printed with:
| Filament | Sunlu PETG High Speed Black |
| Perimeter | 4 |
| Top/Btm Shell Layers | 3 |
| Surface Pattern | Monotonic Line |
| Support | None |
| Brim | None |
| Wall Generator | Classic |
| Precise Wall | Yes |
| Precise Z Height | Yes |
With the amount of perimeter and shell layers, the infill settings does not matter.