1 / 14
Halloween-Train (illuminated) // Halloween-Zug (beleuchtet) — zdjęcie 1
1 / 14

Halloween-Train (illuminated) // Halloween-Zug (beleuchtet)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A truly large and elaborate Halloween project // Ein wirklich großes und aufwändiges Projekt zu Halloween

Ocena
0 / 5
Polubienia
29
Wydruki
0
Wyświetlenia
1265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Just in time for Halloween, the ghost train is coming! This large and elaborate model is the perfect decoration to make children's eyes light up on Halloween. The wagon in the middle (of course, you can print several) can be filled with lots of candy, while the locomotive and ghost wagon are brought to life with flickering LED tea lights. 

The entire model is available in individual parts, making it easy to print with almost no supports (recommended for the window and door frames) and without a special multi-color printer (AMS/MMU). The parts are then simply assembled or glued together. 

At 100% size, the train (as pictured) is approximately 60 cm long and 15 cm high, with a width of 7.5 cm. A total of 5 LED tea lights up to 40 mm in diameter fit into the train. My personal favorite with sufficient brightness and timer: https://amzn.to/3GJbT8i (alternatively from Bambu MakerSupply: https://eu.store.bambulab.com/de/products/led-flame-tea-light-candle-set-warm-yellow). Of course, you can enlarge and scale it upwards as you wish, but due to tolerances, you should not print smaller than 80%! 

You will also need 9 round magnets measuring 6x2 mm: https://amzn.to/4hdklxW or https://eu.store.bambulab.com/de/products/round-magnet?id=48741472600412

3D printing settings 
For optimal results, I recommend the following settings. My BambuLab files are also created accordingly: 
- 2-3 outlines
- 0.2 mm layer height 
- 0.4 mm nozzle 
- 10% infill 

Colors used for my example: 
Of course, you can work with any other color combinations and let your creativity run wild. 
- Black 
- Orange 
- Purple 
- White 
- Transparent 

Further notes for printing: 
Some parts have a color change during printing, which is already included in my Bambu files. All translucent parts should be ironed, and all parts with windows and doors, as well as the boiler base, should be printed with a layer height of 0.1 mm. The two roofs should be printed with at least 5 contours for the light effect to work. 

Optional components: 
There are 3 different sizes for the LED light insert, depending on which tea lights you use. Of course, you only need to print the appropriate file. For tea lights larger than 38 mm, simply do not print any insert. 

Assembly: 
Assembly is very easy; all parts are plugged together and glued if necessary. Comprehensive, illustrated assembly instructions are included for the locomotive, after which the assembly of the carriages is self-explanatory. If you like, you can also use wire and cotton wool to create steam coming out of the chimney. There is a hole in the chimney for this purpose.


------------------------------------------------


Passend zu Halloween fährt jetzt der Geisterzug ein! Dieses große und aufwändige Modell ist die perfekte Dekoration um an Halloween die Kinderaugen leuchten zu lassen. Der Wagon in der Mitte (es können natürlich auch mehrere gedruckt werden) kann mit vielen Süßigkeiten befüllt werden, während die Lok und der Geisterwagon mit flackernden LED-Teelichtern zum Leben erweckt werden.

Das ganze Modell ist in einzelnen Teilen verfügbar, sodass es fast ohne Stützen (bei den Fenster- und Türrahmen ist es zu empfehlen) und ohne einen speziellen Mehrfarben-Drucker (AMS/MMU) ganz einfach zu drucken ist. Die Teile werden dann einfach zusammen gesteckt bzw. geklebt.

Mit 100% Größe hat der Zug (wie abgebildet) eine Länge von ca. 60 cm und eine Höhe von ca. 15 cm, bei 7,5cm Breite.

Es passen insgesamt 5 LED-Teelichter bis 40 mm Durchmesser in den Zug. Mein persönlicher Favorit mit genug Helligkeit und Timer: https://amzn.to/3GJbT8i (alternativ beim Bambu MakerSupply: https://eu.store.bambulab.com/de/products/led-flame-tea-light-candle-set-warm-yellow)
Nach oben kann natürlich beliebig vergrößert und skaliert werden, kleiner als 80% sollte wegen den Toleranzen nicht gedruckt werden!

Zusätzlich werden 9 runde Magnete mit 6x2 mm benötigt: https://amzn.to/4hdklxW oder https://eu.store.bambulab.com/de/products/round-magnet?id=48741472600412

3D-Druckeinstellungen
Für ein optimales Ergebnis empfehle ich die folgenden Einstellungen. Entsprechend sind auch meine BambuLab-Dateien angelegt:
- 2-3 Konturen
- 0,2 mm Schichthöhe
- 0,4 mm Düse
- 10% Füllung

Verwendete Farben für mein Beispiel:
Natürlich kann aber mit allen anderen Farbkombinationen gearbeitet und der Kreativität freien lauf gelassen werden
- Schwarz
- Orange
- Lila
- Weiß
- Transparent

Weitere Hinweise für den Druck:
Einige Teile haben einen Farbwechsel während dem Druck, in meinen Bambu-Dateien ist dieser bereits enthalten. Alle durchscheinenden Teile sollten gebügelt werden, alle Teile mit Fenstern und Türen, sowie der Kessel-Unterbau sollten mit 0,1 mm Schichthöhe gedruckt werden. Die beiden Dächer sollten mit mindestens 5 Konturen gedruckt werden, damit der Lichteffekt funktioniert.

Optionale Bauteile:
Für den LED-Licht-Einsatz gibt es 3 verschiedene Größen, je nachdem welche Teelichter du verwendest. Du musst natürlich nur die passende Datei drucken. Für Teelichter größer als 38 mm einfach gar keinen Einsatz drucken.

Zusammenbau:
Der Zusammenbau ist denkbar einfach, alle Teile werden gesteckt und gegebenenfalls zusätzlich geklebt. Für die Lok ist eine umfangreiche, bebilderte Montage-Anleitung dabei, danach ist der Zusammenbau der Wagons selbsterklärend.

Wer Lust hat kann auch mit einem Draht und Watte noch Dampf an den Schornstein machen. Dafür gibt es ein entsprechendes Loch im Kamin.

Tagi