Enclosure for double wire cable wago junction. VOB 1.5X2 3200W
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print enclosure for connector (Wago like) for two cables of two 1.5mm² cables. Like the ones used in lampshades.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Easy to print enclosure for connector (Wago like) for two cables of two 1.5mm² cables. Like the ones used in lampshades. This is to protect the wago for direct rain and dust for outside. I used it for low voltage leds and have no pretention of waterproofing but it should be better than bare connector…
The pics shows a rough print version, nothing fancy it's functional not art. Use two M2.6X12 mm screws to secure both parts (if you don't have, 2.5 and other length will work too; experiment).
The model with “ears” to secure it to a wall, a wood beam etc. IS designed for M3 screws with cone head.
The connector used here is highly available everywhere (Ali, Amaz etc.).