Enclosure for double wire cable wago junction. VOB 1.5X2 3200W
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print enclosure for connector (Wago like) for two cables of two 1.5mm² cables. Like the ones used in lampshades.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Easy to print enclosure for connector (Wago like) for two cables of two 1.5mm² cables. Like the ones used in lampshades. This is to protect the wago for direct rain and dust for outside. I used it for low voltage leds and have no pretention of waterproofing but it should be better than bare connector…
The pics shows a rough print version, nothing fancy it's functional not art. Use two M2.6X12 mm screws to secure both parts (if you don't have, 2.5 and other length will work too; experiment).
The model with “ears” to secure it to a wall, a wood beam etc. IS designed for M3 screws with cone head.
The connector used here is highly available everywhere (Ali, Amaz etc.).