1 / 6
Trevor Belmont's Haladie / Boomerang (Stationary Version) - Netflix Castlevania Season 4 - FDM — zdjęcie 1
1 / 6

Trevor Belmont's Haladie / Boomerang (Stationary Version) - Netflix Castlevania Season 4 - FDM

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Haladie / Boomerang from Netflix's Castlevania. Trevor Belmont uses this to stab and dispose of night creatures at…

Ocena
0 / 5
Polubienia
30
Pobrania
76
Wydruki
0
Wyświetlenia
880
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The Haladie / Boomerang from Netflix's Castlevania. Trevor Belmont uses this to stab and dispose of night creatures at melee range. This is my stationary version. Both the 2 and 4 bladed versions seen in the show can be assembled depending on the amount of pieces that are printed.

blade1-full x 4

blade2-full - optional (x4 for full boomerang version)

handle x 2

rail x 2 ( x4 for full boomerang version)

pin x 4 (alternatively you can buy 6mm x 50 mm wooden pegs off amazon instead of printing the pins)

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15

Filament: Hatchbox PLA Gold


Notes:

  1. Glue the blade halves, rail halves, and handle halves together with adhesive of choice (superglue, 2 part epoxy etc.)

    Using the provided pins (or purchased wooden alignment pegs 6mm x 50 mm off amazon) align the blades with the handle and glue together.

    Wedge the rail against the flat surface near the hilt of the blade.

    If making the full 4 bladed prop, do the same for two sides and glue the assembled blade2-full to the notches that are 90 degrees to the blade1-full arrangement. I do not recommend throwing this model through the air and cannot guarantee it's resiliency on landing.

Category: Video Games

Tagi