Trevor Belmont's Haladie / Boomerang (Stationary Version) - Netflix Castlevania Season 4 - FDM
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Haladie / Boomerang from Netflix's Castlevania. Trevor Belmont uses this to stab and dispose of night creatures at…
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 76
- Makes
- 0
- Views
- 880
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Haladie / Boomerang from Netflix's Castlevania. Trevor Belmont uses this to stab and dispose of night creatures at melee range. This is my stationary version. Both the 2 and 4 bladed versions seen in the show can be assembled depending on the amount of pieces that are printed.
blade1-full x 4
blade2-full - optional (x4 for full boomerang version)
handle x 2
rail x 2 ( x4 for full boomerang version)
pin x 4 (alternatively you can buy 6mm x 50 mm wooden pegs off amazon instead of printing the pins)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Filament: Hatchbox PLA Gold
Notes:
-
Glue the blade halves, rail halves, and handle halves together with adhesive of choice (superglue, 2 part epoxy etc.)
Using the provided pins (or purchased wooden alignment pegs 6mm x 50 mm off amazon) align the blades with the handle and glue together.
Wedge the rail against the flat surface near the hilt of the blade.
If making the full 4 bladed prop, do the same for two sides and glue the assembled blade2-full to the notches that are 90 degrees to the blade1-full arrangement. I do not recommend throwing this model through the air and cannot guarantee it's resiliency on landing.
Category: Video Games