1 / 4
HC-SR04 Ultrasonic Range Finder Mount - Arduino Smart Car
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of mounts you can print to hold your HC-SR04 Sonar Range Finder in the front (or back) of an Arduino…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 322
- Wydruki
- 3
- Wyświetlenia
- 2438
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (35)Powiązane
This is a set of mounts you can print to hold your HC-SR04 Sonar Range Finder in the front (or back) of an Arduino Smart Car. The images show how to mount it.
Please note that the three of them have different mount shapes to match the holes in the chassis.
All three mounts have holes to screw them to the existing chassis holes: two on top and two on bottom of each mount. (I noticed that 2 screws are enough though)
These are the links to the hardware I used:
Category: Robotics