1 / 3
3/4" Loc-Line Screw Clamp Adam Savage Worklight LED — zdjęcie 1
1 / 3

3/4" Loc-Line Screw Clamp Adam Savage Worklight LED

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I did not fully trust the printed loc line segments; that is why I created a clamp that uses two M3 screws with nuts…

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I did not fully trust the printed loc line segments; that is why I created a clamp that uses two M3 screws with nuts to grip the end of a 3/4 loc line segment. The advantage of this approach, in my opinion, is that the printed parts are less likely to crack, and you can adjust the amount of resistance the joint has by tightening the screws. This will then allow you to add a camera light with a 1/4 screw at the end of a loc line.

I also used this for the pin placement: https://www.printables.com/model/471435-34-loc-line-to-14-for-viltrox-l116t-led-video-ligh

Category: Tools

Tagi