3/4" Loc-Line Screw Clamp Adam Savage Worklight LED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I did not fully trust the printed loc line segments; that is why I created a clamp that uses two M3 screws with nuts…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I did not fully trust the printed loc line segments; that is why I created a clamp that uses two M3 screws with nuts to grip the end of a 3/4 loc line segment. The advantage of this approach, in my opinion, is that the printed parts are less likely to crack, and you can adjust the amount of resistance the joint has by tightening the screws. This will then allow you to add a camera light with a 1/4 screw at the end of a loc line.
I also used this for the pin placement: https://www.printables.com/model/471435-34-loc-line-to-14-for-viltrox-l116t-led-video-ligh
Category: Tools