Zwilling Blender - Lock Repair (replacement part)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One of the parts in the locking of the lid breaks in some time. This part can be replaced
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
We own this Zwilling Blender (type 53003) which we use daily to make shakes.
The machine on its own works very well and we like it. However, the lid that comes with the lock, is fragile. The hinges of the locking part tend to break after a while. I took that opertunity to design a replacement part. It looks quit the same is the original, however i made the hinges a bit stronger.
Installation of the part still requires some attention when putting it togheter. So be carefull.
I'm not sure if this part will be ever printed by someone else for this purpose, but at least I can share it to you. Please let me know incase it helped you to have a lid repaired.
- Material: ABS (!) to be compatible with use in the dishwasher.
- Infill: 100%
- Slicer: 0.15mm structural (!)
- Important: I scaled down the layer thickness to 0.07 by using the variable layer height from top to bottom. I gues that could be done also differently ;)