Divider for TapTo Diskbox by distressedprinter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A divider for distressedprinter's fantastic CR-80 NFC card 'disk box'.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original diskbox model is already a great design, but I noticed the cutouts in the bottom case and realised something was missing.
Took a few tries to get the design right, but this seems to be just about the perfect thickness to give enough movement, but still be rigid enough to support the cards. I haven't tested this extensively so I can't tell you how durable they'll be in the long-term, but they seem to hold up just fine. The lip at the bottom is probably unnecessary, but I wanted it to match the little 'bump' you'd see on dividers for 3.5" floppy disk boxes.
As with 'old school' disk boxes, there is a small amount that protrudes from the bottom of the case. You'll need to add some feet to the original model that are at least 2-3mm thick in order for these to work properly.