Divider for TapTo Diskbox by distressedprinter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A divider for distressedprinter's fantastic CR-80 NFC card 'disk box'.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original diskbox model is already a great design, but I noticed the cutouts in the bottom case and realised something was missing.
Took a few tries to get the design right, but this seems to be just about the perfect thickness to give enough movement, but still be rigid enough to support the cards. I haven't tested this extensively so I can't tell you how durable they'll be in the long-term, but they seem to hold up just fine. The lip at the bottom is probably unnecessary, but I wanted it to match the little 'bump' you'd see on dividers for 3.5" floppy disk boxes.
As with 'old school' disk boxes, there is a small amount that protrudes from the bottom of the case. You'll need to add some feet to the original model that are at least 2-3mm thick in order for these to work properly.