1 / 2
Qidi Q2 Chamber Exhaust Fan Duct Coupler With Lip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coupler for the Q2 to attach a 3" hose to vent fumes modified to have a lip at the end of the coupler for the clamp.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 407
- Wydruki
- 1
- Wyświetlenia
- 1758
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (1)Kolekcje (119)Powiązane
This allows you to fasten a 3" flexible duct to the QiDi Q2 exhaust port. The original model that I remixed this from (thanks Weav) was very good but I had already designed other duct work that had a lip at the end of the tube to “catch” the hose clamp and wanted to have the same geometry for all my duct work. I also expanded the size of the mounting holes so I could use #6 sheet metal screws to fasten it to the back of the Q2.