1 / 2
Campari bottle and glass fridge magnets — zdjęcie 1
1 / 2

Campari bottle and glass fridge magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple model of a Campari bottle and a glass to decorate your fridge.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

A simple set of fridge magnets, containing a Campari bottle (160.5mm x 40mm x 6mm) and a glass with liquid inside (40mm x 39mm x 6mm). 

Assembly

To assemble the kit, you will need: 

  • Glue
  • 12 magnets measuring 5mm x 2mm (8 for the bottle, 4 for the glass)
  • A flat, slightly heavy tool to tighten the magnets and some parts in their slots 

Bottle: 

  1. Glue the magnets (5 x 2) into the eight slots on the back of the bottle body;
  2. Glue the bottle lid to the bottle body; 
  3. Glue the bottle label to the corresponding hole, following the outline for the text frame;
  4. Insert the letters into the text frame using the heavy tool to press them into the slots (no glue needed);
  5. Glue the text frame to the bottle label slot. 

Cup: 

  1. Glue the magnets (5 x 2) to the four slots on the back of the glass;
  2. Glue the "liquid" to the front slot of the glass. 
Printing suggestions
  • 0.4mm nozzle. 
  • 0.2mm layer height. 
  • Supports are only needed for the magnet slots.

Tagi