1 / 2
Campari bottle and glass fridge magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple model of a Campari bottle and a glass to decorate your fridge.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A simple set of fridge magnets, containing a Campari bottle (160.5mm x 40mm x 6mm) and a glass with liquid inside (40mm x 39mm x 6mm).
Assembly
To assemble the kit, you will need:
- Glue
- 12 magnets measuring 5mm x 2mm (8 for the bottle, 4 for the glass)
- A flat, slightly heavy tool to tighten the magnets and some parts in their slots
Bottle:
- Glue the magnets (5 x 2) into the eight slots on the back of the bottle body;
- Glue the bottle lid to the bottle body;
- Glue the bottle label to the corresponding hole, following the outline for the text frame;
- Insert the letters into the text frame using the heavy tool to press them into the slots (no glue needed);
- Glue the text frame to the bottle label slot.
Cup:
- Glue the magnets (5 x 2) to the four slots on the back of the glass;
- Glue the "liquid" to the front slot of the glass.
Printing suggestions
- 0.4mm nozzle.
- 0.2mm layer height.
- Supports are only needed for the magnet slots.