Tea Strainer Dryer (Podložka na odkládání sítka od čaje)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean, clever rest for your tea strainer — dries neatly, catches leaves, and keeps your counter spotless.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The dryer has a solid bottom to catch dry tea leaves, and shallow flaps on the top side to prevent your strainer from sliding off. Just put it there upside down, and next day you'll find it dry, with dried leaves collected on the bottom.
The strainers in my home have outer diameters of 80 or 87 mm, respectively, so I made STLs for those sizes. I will be adding more sizes as I go along, encountering other designs. Feel free to request a specific diameter.
Printing is easy. I print in PLA, 0.4-mm nozzle, 0.2-mm layers, bottom-up, no supports. For better looks I do one or two colour changes mid-print. One should occur right above 1.2 mm, which is the thickness of the solid bottom. Another possibly for printing the flaps in a different colour, but this really depends on your choice.
Edit 23 Oct 2025: Additional sizes added: 75 mm and 60 mm (for irregular-shaped bamboo strainers)