1 / 5
Bosch Kids / Klein - Zollstock / Folding Ruler - Repair Kit — zdjęcie 1
1 / 5

Bosch Kids / Klein - Zollstock / Folding Ruler - Repair Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One replacement segment for a Bosch Kids Folding Ruler

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

It’s funny that Germans say Zollstock to a folding ruler that’s in metric, because Zollstock literally means Inchstick.

Anyways, with a used Bosch Kids Workbench came a broken folding ruler.

As you can see on the pictures, the receptacle part of the middle element is broken in two places. Thus the original end element was falling off constantly. 
The replacement fits into the broken receptacle and still gives a good amount of friction when folding.

If your kid’s name happens to be Tino, you’re in luck! 

If not, take the no name version or check out the Onshape model. 
Edit Sketch 3 to put in a different name: https://cad.onshape.com/documents/826569c63d333c9f148f4579/w/822909cf7d44554d0fb8ee51/e/07b6e78b3715a0e49a0bf000

Or leave a comment with a suggestion for a generic text and I put it in.


Printing Instructions:

Most importantly use a filament that you know for its good layer adhesion, to give the hinge knob best durability. My silver PETG worked fabulously, considering. But I have a cheap gray PLA that also flexes a lot before breaking.

Obviously print the knob upright, there is no other way when using layers. 
Set to 100% infill and use the rectilinear pattern for surfaces and infill.

For best results check the transition from top surface to hing knob in the layer preview. Play with arachne wall generator and the thick walls checkbox to reduce empty spaces.

It might as well be helpful to reduce the layer thickness to something like .16 or .14 mm. I don’t remember what I used.

Good Luck! At least I feel lucky that my print is still holding up ;)

Tagi