1 / 3
Hammock stand wheel mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to attach wheels to a portable hammock stand. Parametric scad file included.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Hammock attachment to add wheels. Makes it easy to move the hammock to find shade!
Goes inside the tube of the hammock feet, with a screw hole to lock it in place. If your hammock doesn't have a screw hole at the feet, you'll want to drill one. You can also rely on a friction fit, but it might slide out eventually.
Print in a heat resistant material like ASA or ABS.
BOM:
- ½ inch x 3 inch clevis pin - I used this one from lowes
- Hitch Pin clip to match clevis pin
- #10 x ½ inch screw. - Use whatever size you have lying around and modify the scad file to match
- 6" wheel - I used this one from Harbor Freight