Binder Clip Label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap fit labels that fit on the end of a 19mm (3/4 inch) binder clip.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I store my filament spools in vacuum sealeded bags stacked inside a cabinet. I needed a way to ID each spool without being able to see the label on the sides of spool.
I printed in PETG with the Bambu slicer strength settings at 0.2mm resolution. I found on my P1S that I could get 11 pair to print per batch without incident, but when I tried more, like 22 pair, I had adhesion issues further out on the build plate. I used a build plate with a pattern that imparted some reflectivity to the outside surface which actually helps with visibility. I used a silver paint Sharpie marker to write numbers on the tags to maximize visibility.
https://a.co/d/cc7nhSK - Build Plate
https://a.co/d/bpgvjLe - Green Sunlu PETG
https://a.co/d/7iQWXHy - Silver paint Sharpie marker
https://a.co/d/1tWDZuv - 19mm (¾ inch) binder clips