Binder Clip Label
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap fit labels that fit on the end of a 19mm (3/4 inch) binder clip.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I store my filament spools in vacuum sealeded bags stacked inside a cabinet. I needed a way to ID each spool without being able to see the label on the sides of spool.
I printed in PETG with the Bambu slicer strength settings at 0.2mm resolution. I found on my P1S that I could get 11 pair to print per batch without incident, but when I tried more, like 22 pair, I had adhesion issues further out on the build plate. I used a build plate with a pattern that imparted some reflectivity to the outside surface which actually helps with visibility. I used a silver paint Sharpie marker to write numbers on the tags to maximize visibility.
https://a.co/d/cc7nhSK - Build Plate
https://a.co/d/bpgvjLe - Green Sunlu PETG
https://a.co/d/7iQWXHy - Silver paint Sharpie marker
https://a.co/d/1tWDZuv - 19mm (¾ inch) binder clips