1 / 1
Hyundai Kona 2019 armrest tray - thinner walls, bigger tabs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used gerryw's original tray for about a year before the tabs broke off, perhaps due to user error. In any case, the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I used gerryw's original tray for about a year before the tabs broke off, perhaps due to user error. In any case, the walls seem thicker and more rigid than necessary.
For this remix, I filled in the gap between the tabs, thinned the walls from 2.1mm to 1.6mm, and thickened the walls to 3.2mm just where they meet the tabs. The external dimensions are unchanged.
Print settings:
- Use PETG instead of PLA, if your car gets hot in the summer
- 2 walls
- 100% infill
- 0 top/bottom layers (use infill instead)
- Infill speed: same as your perimeter speed
- Supports: snug, 10mm pattern spacing, 90 degree pattern angle (or whatever, as long as the tabs are supported)
- Don't support bridges: unchecked (i.e. DO support bridges)
Category: Automotive