1 / 1
Hyundai Kona 2019 armrest tray - thinner walls, bigger tabs — image 1

Hyundai Kona 2019 armrest tray - thinner walls, bigger tabs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I used gerryw's original tray for about a year before the tabs broke off, perhaps due to user error. In any case, the…

Rating
0 / 5
Likes
3
Downloads
64
Makes
0
Views
346
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

I used gerryw's original tray for about a year before the tabs broke off, perhaps due to user error. In any case, the walls seem thicker and more rigid than necessary.

For this remix, I filled in the gap between the tabs, thinned the walls from 2.1mm to 1.6mm, and thickened the walls to 3.2mm just where they meet the tabs. The external dimensions are unchanged.

Print settings:

  • Use PETG instead of PLA, if your car gets hot in the summer
  • 2 walls
  • 100% infill
  • 0 top/bottom layers (use infill instead)
  • Infill speed: same as your perimeter speed
  • Supports: snug, 10mm pattern spacing, 90 degree pattern angle (or whatever, as long as the tabs are supported)
  • Don't support bridges: unchecked (i.e. DO support bridges)

Category: Automotive

Tags