Tuck-in motor modification for Losmandy Titan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tuck-in motor modification for the classical Losmandy Titan equatorial mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
This is a tuck-in motor modification for the classical Losmandy Titan-50 equatorial mount.
Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly and making them to be easily bumped into accidentally. Losmandy has manufactured tuck-in version of mounts nowadays, but there are no tuck-in modification kits available for users to install by themselves.
For the pulley-drive tuck-in modification of the Titan-50 (i.e., 1:50 gear reducer) mount, the procedures are
using the DEC tuck-in adapter plate and pairing with GT2 T48 pulley, GT2 T24 pulley & GT2 belt (length 186mm)
using the RA tuck-in adapter plate and pairing with GT2 T48 pulley, GT2 T24 pulley & GT2 belt (length 156mm)
Please see the attached photos for more details.
So the following items are required:
GT2 T48 pulley wheel: two pieces are needed (with 10mm diameter center-hole)
GT2 T24 pulley wheel: two pieces are required (with 4.78mm diameter center-hole)
GT2 pulley belt: 2 pieces are needed. One with 186mm belt length (or 93 teeth) & the other with 156mm (or 78 teeth).
M4 Screws, M4 square nuts & washers.
Note 1: the axis-diameter of the reducer gearbox is around 4.7625mm, however, the diameter of the selected pulley center-hole is 4mm, therefore, some modification is required for perfect fitting.
Note 2: new version that one can adjust the tension of pulley belt is added.