1 / 6
Tuck-in motor modification for Losmandy Titan mount — image 1
1 / 6

Tuck-in motor modification for Losmandy Titan mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tuck-in motor modification for the classical Losmandy Titan equatorial mount

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

This is a tuck-in motor modification for the classical Losmandy Titan-50 equatorial mount.

Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly and making them to be easily bumped into accidentally. Losmandy has manufactured tuck-in version of mounts nowadays, but there are no tuck-in modification kits available for users to install by themselves. 

For the pulley-drive tuck-in modification of  the Titan-50 (i.e., 1:50 gear reducer) mount, the procedures are

  • using the DEC tuck-in adapter plate and pairing with GT2 T48 pulley, GT2 T24 pulley & GT2 belt (length 186mm)

  • using the RA tuck-in adapter plate and pairing with GT2 T48 pulley, GT2 T24 pulley & GT2 belt (length 156mm)

Please see the attached photos for more details.  

So the following items are required:

  • GT2 T48 pulley wheel: two pieces are needed (with 10mm diameter center-hole)

  • GT2 T24 pulley wheel: two pieces are required (with 4.78mm diameter center-hole)

  • GT2 pulley belt: 2 pieces are needed. One with 186mm belt length (or 93 teeth)  & the other with 156mm (or 78 teeth).

  • M4 Screws, M4 square nuts & washers.

Note 1: the axis-diameter of the reducer gearbox is around 4.7625mm, however, the diameter of the selected pulley center-hole is 4mm, therefore, some modification is required for perfect fitting. 

Note 2: new version that one can adjust the tension of pulley belt is added.

 

Tags