Counting matching models…
This is a 3D printed fixed equatorial wedge for the ZWO SeeStar S50 telescope. It is supposed to be mounted between the ZWO provided tripod and the telescope itself and lets you use it in equatorial mode, without the field rotation…
After repeated trial shooting, stars sometimes blur at 60 sec exposure with auto guide. 30 sec or less, stars are stable and appear as dots. Consistently good results are obtained with live stacking of 30 seconds or less. Upload photos of…
The great thing about an equatorial sundial is that it is spaced evenly no matter where you are on the globe, and you only need to adjust the angle at which it sits relative to your latitude, so that the gnomon is parallel to the Earth's…
This adapter aids in balancing a ZWO Seestar S30 or S50 smart telescope over the center of gravity of the tripod when used in equatorial (EQ) mode using an adjustable EQ wedge. Say goodbye to field rotation and hello to zenith imaging…
Introduction The original design of the “Sunquest” sundial was derived from a traditional armillary sphere, featuring an axis parallel to that of the Earth and multiple nested rings representing latitude, longitude, the celestial equator,…
Equatorial Harmonic Drive (Strain Wave) Go-To, computerized telescope mount head. *Partially 3D Printable.
UPDATE: I made a new adjustable adapter that I think is better, check it out here: https://www.printables.com/model/1180078-zwo-seestar-s30-s50-equatorial-eq-wedge-adapter-ad This adapter aids in balancing a ZWO Seestar S30 or S50 smart…
Comming Soon! The accuracy of this equatorial mount is very high. I believe that it is comparable to products on the market. Since the gears are commercially available, only about 10 parts need to be 3D printed, so the printing time and…
Introduction Hello! I'm Zach, and over the last few months I've been working on designing and building a 3d-printable harmonic drive equatorial mount that can accurately track the sky for astrophotography. I've gone through a few…
Now that the snow is practically gone & one can enjoy hiking through the woods or park again, wouldn't it be cool to have an old fashion way of telling the time where ever you go without having to rely on a distracting phone? To learn…
I have built equatorial mounts utilising harmonic reduction and cycloidal reduction mechanisms. This time, I designed an equatorial mount using pulley belts for reduction. A three-stage reduction of 1:5.33 was combined with a Nema11 motor…
Not much to say here. This is the first “mod” for Hadley (and other such telescopes), which is an intrinsically modular system. It was very highly requested, so I tested it on a heavy refractor I made in the same telescope footprint. I…
I recently got a Dwarf 3 telescope and wanted to improve a little its use when in EQ Mode. Al the other solutions I found where a little to over engineered and I wanted something simple, light and easy to travel with. This one fits in the…
It weighs approximately 1.5 kg and can reliably slew (GOTO) and track telescope setups of up to about 5 kg. For astrophotography with a telescope, active guiding is required. Cost of all the parts for the mount is around 200 € without…
ZM-1, aka Monique l'aventureuse des étoiles Approximative cost : 350€ (with printed parts and electronics) Weight : 1.6 kg Usable charge : TbD, 3kg expected BoM 3D parts PETG parts (60g) : carter + support_batterie PC-CF parts (400g) :…
I recently got an Orion telescope with their EQ-1 equatorial mount that's used with various models. The included tray was ok, but there's no organization for your accessories and they end up jumbled. This improved accessory tray has…
Overview Hadley Harmonic is designed to be a low cost alternative to COTS strain wave equatorial mounts. I recommend running OnStep* on an esp32. It integrates nicely with hillexed's Hill Mount and is designed to hold the imperial version…
his is my record of a DIY equatorial mount for astronomy use. It is a design based on collated ideas from other projects and and it is designed to be built easily using readaily available parts and 3D printed parts. Whilst the goal has…
Print without supports. Fix holes using 1mm drill bit(carefully! and do it manually :) ) Cut 1mm steel wire, and connect parts. Optionally, you can add string. How to read hour? 1. Open protractor, and tilt it by 90 deg 2. Open gnomon and…
ULTIMO AGGIORNAMENTO Ho aggiunto il manuale di montaggio sia in italiano che in inglese che renderà sicuramente più semplice l'assemblaggio delle componenti stampate e le viterie varie. Aggiornamento. Ho modificato diverse cose tra cui la…
This is a motorized equatorial sky tracker designed for long-exposure astrophotography. The tracker rotates a single polar axis at sidereal rate, allowing a fixed camera to follow the motion of the night sky and eliminate star trailing…
The MountOne Printed Equatorial Tripod (PET). The PET features adjustable legs, an integrated spirit level, and polar alignment for latitudes between 30-90°. Adjusters at the top of the legs level the tripod, referencing a spirit level in…
this is a very fast remix of the great Equatorial_mount_for_Dwarf_II_Telescope D2 6130910 by VIctor Gabriel (kudos to him) I modified it for my position (ROME, ITALY) that is about 42 degree and made some micro editing adding here and…
For polar alignment of equatorial telescopes using a laser pointer. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts : No Supports: Doesn't Matter Resolution: 0.15mm OPTIMAL Infill: 25% Filament Brand: Doesn't matter Filament…
The example .stl is for Prague. Insert a latitude, longitude, and local time into equatorial_sundial.scad to generate for a different location. When oriented north-south facing the equator, the facet edges mark hour boundaries. The…
A compact DIY harmonic German equatorial mount designed for lightweight astrophotography setups. The mount is based on the Fysetc E4 v1.0 controller board running OnStepX firmware. Update May 24th, 2026: Added a Fysetch holder - a dumb…
This is a mobile phone mount for an equatorial mount. It fits a finder shoe or Vixen mount and is dedicated to the SynScan Pro App for polar alignment. Category: Physics & Astronomy
An insert an cap that adapts an olympic weight plate to an M12 threaded rod that I am using as a counterweight for my CG-2 equatorial telescope mount. This requires two M12 hex nuts to clamp the weight along the counterweight shaft.
Purpose First step when aligning an equatorial mount is a rough alignment of the rotational axis, polaris in the northern hemisphere. The more precise the better for next steps. With a laser beam exactly along the axis of rotation rough…
Print and glue to the base.
This is a cover of DEC transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
This is an Arduino-based controller for RA and DEC motors. I've installed this on both a Great Polaris mount and an old Meade Starfinder. This project includes all the printed parts for the Starfinder installation. Included in the…
This is a cover of RA transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
54 degree wedge designed to slip into the pilar of Skywatcher AZ-GTI tripod. Requires no additional hardware this way and makes very sturdy design. Lock thumbscrews into shaft, and use original 3/8 thumbscrew to mount AZ-GTI onto wedge/…
The positioning of the screws for attachment to the tripod is “relatively unfavorable”. To Loosening or tightening with the Allen key. This tool helps to simplify tightening or unscrewing - see pictures. Printing PETG recommended, Nozzle…
This part replaces the piece on the equatorial mount that the clamp circles are mounted on.
Purpose First step when aligning an equatorial mount is a rough alignment of the rotational axis, polaris in the northern hemisphere. The more precise the better for next steps. With a laser beam exactly along the axis of rotation rough…
This is a 15x15x40mm bubble level holder for the RA axis of JTW P75 equatorial mount. Four M5x10mm stainless screws are required for assembly. Bubble levels & screws can be purchased, for example, from Amazon.
This is a tuck-in motor modification for the classical Losmandy G11 equatorial mount. Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly and…
This is a GOTO conversion for Takahashi JP equatorial mount by using Losmandy Gemini-2 control system. Takahashi JP equatorial mount is vintage and yet classical. Here are simple ways to convert it into the modern GOTO system by using…
This is a 15x15x40mm bubble level holder for the RA axis of Losmandy GM8/G811 equatorial mounts.
This is a tuck-in motor modification for the classical Losmandy GM8 equatorial mount. Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly and…
I recently put together an equatorial wedge for my NexStar 6SE and happened to have a SkyWatcher SAM, so decided to whip up a quick mount for the polar scope to get decent polar alignment. The mount is sized for 23mm plywood (though if…
This is a 15x15x40mm bubble level holder for the RA axis of Takahashi JP/NJP equatorial mounts. p.s. A modified version (V3) is added.
An equatorial ring sundial: a 144 mm hour ring with Roman numerals and quarter-hour ticks, an arrow gnomon through two 120 mm rings, set in a cradle on a turned compass base. Free. Details - 139 x 144 x 168 mm assembled - 6 parts, all…
I have built equatorial mounts utilising harmonic reduction and cycloidal reduction mechanisms. This time, I designed an equatorial mount using pulley belts for reduction. A three-stage reduction of 1:5.33 was combined with a Nema11 motor…
This is a motorized equatorial sky tracker designed for long-exposure astrophotography. The tracker rotates a single polar axis at sidereal rate, allowing a fixed camera to follow the motion of the night sky and eliminate star trailing…
