1 / 2
Helping tool allen wrench 6mm for iOptron CEM70 equatorial mount to attach it to the tripod. — image 1
1 / 2

Helping tool allen wrench 6mm for iOptron CEM70 equatorial mount to attach it to the tripod.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Helping tool for loosening or tightening the 6mm Allen screw for attaching the head to the tripod.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

The positioning of the screws for attachment to the tripod is “relatively unfavorable”. To Loosening or tightening with the Allen key. This tool helps to simplify tightening or unscrewing - see pictures.

Printing

PETG recommended, Nozzle 0.4 mm, Layer height 0.2 mm. 3 Wall loops, alternate extra wall ON, no support, infill 8% or more, but doesn't really matter as there is not very much infill.
BRIM!!! Auto Brim did a good job, but be sure if your used slicer do it well too.
 

It's not as convenient on the GPS sensor side as on the other side - the tool could be longer. But printing would be more difficult, so I haven't tried it (yet).

 

-------------------------------
The only reward for a hobbyist is likes.

Support / Donation for my work

Tags