Counting matching models…
ASIAIR mount for CEM26 stock tripod (not literock). Made for my ASIAIR Plus but should work with any similar dovetail. Remixed from the following two models: https://www.thingiverse.com/thing:5235482…
UPDATE: I have been using this pier adapter continuously for over a year and it has been outside mounted in all conditions, including Michigan winters. It works well. However, I recently bought another iOptron pier and another ZWO PE200…
The dimensions are entirely based on the original baffle. There's nothing wrong with it per se. My scope was purchased in late 2019, it already came with baffle extension, so no stray light issue. But I don't feel comfortable reaching…
Mount that holds iOptron powerbrick and attaches to LiteRoc 1.75" leg
I designed this to leave as much room as possible for the mini pc to cool. As you know, it does get rather warm while imaging. Preferable to print this model with PETG as it is more resilient to both, the atmospheric heat and MiniPC's own…
A removable bracket or the Pegasus Pocket Powerbox (PPB) Micro that clips onto a 1.75 tripod tube The tube clip is just pushed onto the tube and also has a bolt and heated insert to secure further. The PPB is attached to a bracket via two…
A shelf for the Mele Quieter 4C mini PC that fits on the iOptron 360 tri pier. It uses the pre-existing 3/8" threaded holes on the top plate to mount the shelf. Since the fanless Meles run hot, I designed a bracket to mount the Mele . The…
i made this to replace the shoulder bolts for a tri pod but will work to make a 20mm x 8mm sleeve for M6 hardware
This is a simple secondary mirror mask I made to ease collimating the focuser with a laser. If you have trouble with it like I do this makes it quick and easy. This is sized for the RC8 secondary baffle tube. I have supplied the FreeCAD…
I am of the “keep everything off the OTA” camp vs. “put everything on the OTA but the kitchen sink” camp. With that in mind I designed and printed the models you see on this page. I share the mele with a “permanent” iOptron 360 tri-pier…
This is a somewhat sketchy apparatus to add an IO panel to your iOptron CEM26 mount, similar to what we have on the larger models of the series. It takes advantage of the existing hollow tube assembly to pass cables inside of it and avoid…
The positioning of the screws for attachment to the tripod is “relatively unfavorable”. To Loosening or tightening with the Allen key. This tool helps to simplify tightening or unscrewing - see pictures. Printing PETG recommended, Nozzle…
Purpose First step when aligning an equatorial mount is a rough alignment of the rotational axis, polaris in the northern hemisphere. The more precise the better for next steps. With a laser beam exactly along the axis of rotation rough…
This is an adapter that allows you to use a cheap laser pointer in the polar scope mount of an iOptron SkyTracker Pro for quick alignments. https://www.ioptron.com/product-p/3322.htm https://a.co/d/00xN331A OpenSCAD file is include if you…
Just a very simple bracket to hold down a laser marker to the top of the iOptron SkyGuider Pro. By pointing the tracker with the laser to Polaris it makes it easier to get an initial point to start the polar alignment with Polaris within…
Adapter for iAFS2 - iOptron 2" Inline Automatic Focuser to SCT 2″ thread (2″-24tpi) You can buy a commercial version from RAFCamera, well made from Aluminum but relatively cheap. Category: DIY
This is an adapter that allows you to use a cheap laser pointer in the polar scope mount of an iOptron SkyTracker Pro for quick alignments. https://www.ioptron.com/product-p/3322.htm https://a.co/d/00xN331A OpenSCAD file is include if you…
To attach the iOptron hand controller 8409 to a 1.75" tripod. Couldn't find anything like this before. Original model made by DIVIIK.
The fixing screw i created for the side to fix the position. The other screw i created for the other side. But it is possible touse the fixing screw on both sides too. For those who have problems also with the inside gear. Thre is also a…
After equipping my iOptron CEM70 mount with a USB-3 hub, the Raspberry Pi (RPi 5) had to be fixed somehow so that it wasn't constantly hanging on the cables. Printing PETG is recommended, weight ~ 55 grams. Nozzle 0.4 mm, Layer height 0.3…
Hi All I have an iOptron Skyhunter mount. Good mount, except, that getting the knobs tightened reliably is a real pain in the behind. After doing some asking around, I came up with the idea of making a handle for each of the knobs. So I…
To attach the iOptron hand controller 8409 to a 1.75" tripod. Couldn't find anything like this before. Original model made by DIVIIK.
A practical holder for Bioptron lamps, designed to keep the device stable at a comfortable angle. 📐 Includes a cable storage compartment to keep everything neat and organized. 🔌 Compact design makes it perfect for desks or bedside tables.…
Made from white PLA filament, the mount is designed to fit onto the body of an iOptron StarGuider Pro camera mount, specifically sitting over the section containing the polar axis scope. The phone mount features a curved lower section…
The iOptron CEM40 telescope mount ships with the 8407+ handset, but does not have a holder, so it just dangles with no place to attach it. To remedy this, I designed a holder for the handset that attached to the tripod leg (2 inch…
I made this to mount a travel router to my telescope rig.
To attach the iOptron hand controller 8409 to a 1.5" tripod Remixed from: https://www.thingiverse.com/thing:5179175 Category: 3D Printer Accessories
Used Overture grey ABS at 265C nozzle, 110C bed with .8mm nozzle. Prusa MK3S+ No supports or brim. Smooth PEI bed. Note the handset bracket (the part the handset goes into), has a sloped surface on the inside edge on the front. This…
NEW MODEL. This adapter allows to switch from an iOptron mount to a Sky-Watcher without changing the base or the tripod. The new version is stronger and can support more than 15 lbs (+7kg). The infill is set to 25% and the sparse infill…
Printed in 95A TPU. It relies on frication to fit properly, the final dimension is critical, so the FreeCAD project file is also provided. You only need to tweak one dimension, highlighted below. For reference, my printer prints 0.4-0.5mm…
