RA transmission axes cover for Losmandy G11T equatorial mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RA transmission axes cover for Losmandy G11T equatorial mount after changing the transmission method via pulley.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v2.0
This is a cover of RA transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley.
Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear rotation axis and motor reducer box axis is via 1:1 gear transmission. So it is straightforward to try the pulley modification.
The C-C distance between the 2 rotation axes of the RA part of G11T mount is around 66mm, and there are various possible choices of pulley-teeth & belt-length combination to match the distance. One choice is GT2 T48 pulley and GT2 belt with length 228mm, which fit the modification perfectly. So the following items are required:
GT2 T48 pulley: 2 are needed. One with 10mm center-hole & one with 5mm center-hole
GT2 pulley belt: 1 are needed. Belt length is 228mm (or 114 teeth).
Screw & washer: 2 set are required. The washer diameter is around 9mm.
Note: the axis-diameter of the reducer gearbox is around 4.7625mm, however, the diameter of the selected pulley center-hole is 5mm, therefore, some lining is required for perfect fitting. 3 layers of aluminum foil seem do the job.