1 / 4
RA transmission axes cover for Losmandy G11T equatorial mount — zdjęcie 1
1 / 4

RA transmission axes cover for Losmandy G11T equatorial mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

RA transmission axes cover for Losmandy G11T equatorial mount after changing the transmission method via pulley.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
129
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This is a cover of RA transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley.

Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear rotation axis and motor reducer box axis is via 1:1 gear transmission.  So it is straightforward to try the pulley modification. 

The C-C distance between the 2 rotation axes of the RA part of G11T mount is around 66mm, and there are various possible choices of pulley-teeth & belt-length combination to match the distance.  One choice is GT2 T48 pulley and GT2 belt with length 228mm, which fit the modification perfectly.  So the following items are required:

GT2 T48 pulley: 2 are needed. One with 10mm center-hole & one with 5mm center-hole

GT2 pulley belt: 1 are needed. Belt length is 228mm (or 114 teeth).

Screw & washer: 2 set are required. The washer diameter is around 9mm.

Note: the axis-diameter of the reducer gearbox is around 4.7625mm, however, the diameter of the selected pulley center-hole is 5mm, therefore, some lining is required for perfect fitting. 3 layers of aluminum foil seem do the job.

Tagi