1 / 5
DEC transmission axes cover for Losmandy G11T equatorial mount — image 1
1 / 5

DEC transmission axes cover for Losmandy G11T equatorial mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DEC transmission axes cover for Losmandy G11T equatorial mount after changing the transmission method via pulley.

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

This is a cover of DEC transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley.

Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear rotation axis and motor reducer box axis is via 1:1 gear transmission.  So it looks straightforward to try the pulley modification.

However, the DEC worm gear rotation axis and its corresponding turning gear are press-fitted together, so one need to make another DEC worm gear rotation axis for the corresponding turning pulley. This can be done easily by a lathe machine. 

The rotation axis is made from a 8mm-diameter stainless steel cylinder bar, and lathe it to 4.78mm-diameter with 18mm in length & adjacent with 8mm-diameter with 18mm in length, so total 36mm in length. (Note: this part of 8mm-diameter with 18mm in length is more than enough, one can see this part protrudes above the pulley surface from the picture.)

The C-C distance between the 2 rotation axes of the DEC part of G11T mount is around 38mm, and there are various possible choices of pulley-teeth & belt-length combination to match this requirement.  One choice is GT2 T48 pulley and GT2 belt with length 172mm, which fit the modification perfectly.  So the following items are required:

Stainless steel rotation axis for DEC worm gear.

GT2 T48 pulley: 2 are needed. One with 8mm center-hole & one with 5mm center-hole

GT2 pulley belt: 1 are needed. Belt length is 172mm (or 86 teeth).

Screw & washer: 2 set are required. The washer diameter is around 8mm.

Note: the axis-diameter of the reducer gearbox is around 4.7625mm, however, the diameter of the selected pulley center-hole is 5mm, therefore, some lining is required for perfect fitting. 3 layers of aluminum foil seem do the job.

Tags